0

Ampere Hour Meter

Showing 17 Items
ViewView
  1. Digital Ampere Hour Meter

    Four Digit Ampere Hour Meter IM 2501 is an electronic device used to measure total electric charge that passes through the circuit at a specific time. The device is used for battery charging and electroplating purposes. It controls the rectifier as per the set point. The device has a 4-digit display which shows the amount of charge as well as current flowing in the circuit, therefore there is no need to attach extra ammeters in the circuit. This model has option of Modbus interface for remote monitoring and control.
    Send Inquiry
  2. Ampere Hour Minute Meter with Totaliser And Three Doser Control Relays

    Doser control Ampere Hour meters are specially designed for electroplating applications. This model is the same as the more popular and widely used IM2503, except it has 3 relay outputs instead of two. These relay outputs can be used for adding brightener, additive and chemical in the plating bath on the basis of Ampere Hours consumed so that the concentration of the plating bath is maintained at a constant level. This in turn ensures uniform plating as well as automation of the plating process. IM2509 has 4 digit display for AH as well as current display and 6 digit display for showing totaliser value. Modbus communication is optional for remote monitoring these units.
    Send Inquiry
  3. Ampere Hour Meter With Current Limit for Rectifier Control While Battery Charging

    IM2508 is a 4 digit Ampere Hour meter with current limit setting. These are designed specifically for battery charging or discharging applications where if for any reason the current crosses a certain limit, which can damage the battery, then the relay will operate to break the circuitry. The device has a 4-digit display which shows the amount of charge as well as current flowing in the circuit, therefore there is no need to attach extra ammeters in the circuit. Modbus interface is optional for remote monitoring these units.
    Send Inquiry
  4. Programmable Ampere Hour Meter

    Four Digit Ampere Hour Meter IM 2501 is an electronic device used to measure total electric charge that passes through the circuit at a specific time. The device is used for battery charging and electroplating purposes. It controls the rectifier as per the set point. The device has a 4-digit display which shows the amount of charge as well as current flowing in the circuit, therefore there is no need to attach extra ammeters in the circuit. This model has option of Modbus interface for remote monitoring and control.
    Send Inquiry
  5. Ampere Hour Meter With Current Limit

    IM2508 is a 4 digit Ampere Hour meter with current limit setting. These are designed specifically for battery charging or discharging applications where if for any reason the current crosses a certain limit, which can damage the battery, then the relay will operate to break the circuitry. The device has a 4-digit display which shows the amount of charge as well as current flowing in the circuit, therefore there is no need to attach extra ammeters in the circuit. Modbus interface is optional for remote monitoring these units.
    Send Inquiry
  6. 4 Digit Ampere Hour Ampere Minute Ampere Seconds Meter with 6 Digit Totaliser

    IM2502C is the most commonly used Ampere Hour meter in electroplating as well as in battery monitoring applications. It has one setpoint for rectifier controller plus it has built in totaliser, which allows batching operation in plating applications and gives the total charge from rectifier in case of battery applications. The totaliser can be used to ascertain the electrolyte concentration and decide about adding the chemicals periodically. IM2502C has two displays, one for showing current flowing in the circuit and other display shows present AH count and/ or total AH count. Modbus communication is optional for remote monitoring these units.
    Send Inquiry
  7. Ampere Hour Meter Battery Charge / Discharge (Im 2505)

    Battery Monitoring Ampere Hour Meter IM 2505 is a device which is used to measure charge and discharge from a battery. It is ideally useful for applications where large battery banks are used as well as in applications like Inverters and UPS where batteries are used. IM2505 tracks the battery charge and at any given point of time shows the charge present in the battery. It provides an optional factor to cater for battery aging. IM2505 is used in Submarines where Kilo AH capacity battery banks are used. It comes with an optional Modbus Interface to be used with SCADA or similar software for online monitoring of the battery status.
    Send Inquiry
  8. Ampere Hour Minute Meter with Totaliser & 2 Doser Control Relays For Additive And Brightner Addition

    Doser Control IM 2503 is a technically advanced model for ampere-hour meter which is ideal for electroplating applications. It has two additional relay outputs apart from the rectifier control relay. These two relay outputs can be used for adding brightener, additive in the plating bath on the basis of Ampere Hours consumed so that the concentration of the plating bath is maintained at a constant level. This in turn ensures uniform plating as well as automation of the plating process. This Doser Control IM 2503 is equipped with two displays; one shows the total current flowing in the circuit and other shows the totalizer. It can be operated in ampere-hour or ampere minute mode as per the need. Modbus communication is optional for remote monitoring these units.
    Send Inquiry
  9. Stand-Alone Table-Top Cabinet with Any Of KVAR AHM Models with Ready Termination

    In applications where rectifier panels are already installed and an Ampere Hour meter is to be added later on, TE2504 comes handy. It is a stand alone unit with an Ampere Hour meter which can be any of the models mentioned above. TE2504 has a built in Shunt, high current relay for rectifier control and banana plugs for connecting it in the existing rectifier circuit without opening the rectifier panel. This plug and play kind of module allows the user to quickly set up the system and start using the Ampere hour meter in his setup. These modules are ideally suitable for precious metal plating like gold where currents are low and rectifiers are smaller in ratings. These can also be used in battery charge discharge applications for on site testing where it is not possible to break the existing setup.
    Send Inquiry
  10. Master Unit Communicating with Multiple AHMs to Add Additive And Brightner with Multiple Rectifiers

    IM2513 is specifically designed for electroplating applications where there are multiple plating electrodes in a single plating bath. In such a scenario, addition of chemicals is dependent on total consumption of all individual electroplating stations. Central controller connects to the individual ampere hour meter and keeps track of the total consumption of the ampere hour meter and accordingly adds brightener and or additives to the plating bath. The unit has an option of two or three relays based on the number of chemicals to be added. Central controller can connect up to 8 such devices at a time.
    Send Inquiry
  11. Ampere Hour Meter with Independent Charge and Discharge AH Count

    Charge discharge type ampere hour meter is used in battery life cycle testing as well as for battery monitoring in any typical battery application. A battery undergoes discharge when load is connected to battery and is charged through external supply when it is not being loaded. IM2507 has two independent displays to show charge and discharge ampere hours being drawn by the battery. Modbus communication is optional for remote monitoring these units.
    Send Inquiry
  12. 6 Digit Ampere Hour Ampere Minute Ampere Seconds Meter

    Six Digit Ampere Hour Meter IM 2506 is an electronic device used to measure total electric charge that passes through the circuit at a specific time. The device is used for battery charging and electroplating purposes. It controls the rectifier as per the set point. The device has a 4-digit display which shows the amount of charge as well as current flowing in the circuit, therefore there is no need to attach extra ammeters in the circuit. This model has option of Modbus interface for remote monitoring and control.
    Send Inquiry
  13. Ampere Hour Meter With Timer

    Four Digit Ampere Hour Meter IM 2510 is an electronic device used to measure total electric charge that passes through the circuit at a specific time. The device is used for battery charging and electroplating purposes. It controls the rectifier as per the set point. The device has a 4-digit display which shows the amount of charge as well as current flowing in the circuit, therefore there is no need to attach extra ammeters in the circuit. In battery charging / discharging applications, sometimes controlling the rectifier is based on timer instead of charge.
    Send Inquiry
  14. KAH Meter

    Battery Monitoring Ampere Hour Meter IM 2505 is a device which is used to measure charge and discharge from a battery. KAH meter is used where there are large battery banks and currents drawn are extremely high. IM2505_HAH tracks the battery charge and at any given point of time shows the charge present in the battery. It provides an optional factor to cater for battery aging. IM2505KAH is specifically used in Submarines where Kilo AH capacity battery banks are used. It comes with an optional Modbus Interface to be used with SCADA or similar software for online monitoring of the battery status.
    Send Inquiry
  15. Ampere Hour Logger (IM2511)

    In battery testing, primarily life cycle tests, the battery is kept under cyclic operation of charging and discharging. Ampere Hour Logger IM2511 is used in such applications where DC Voltage, DC Current, AH count (charge) and/or Watt Hour count (energy) is logged periodically. It has two individual displays that are used for showing voltage and current. As per requirement, customers can set a time interval for charging and discharging. This data can be downloaded later serially to a PC or directly printed on a serial printer.
    Send Inquiry
Contact Us

68, Kakad Industrial Estate, L. J. Road No. 3, Off Kataria Marg, Mahim West, Mumbai Maharashtra India +918037301803
Phone :+918037301803